Download Print this page
Skyrc B6 Lite Quick Start Manual
Skyrc B6 Lite Quick Start Manual

Skyrc B6 Lite Quick Start Manual

Professional balance charger, 220 watts /13 amps

Advertisement

Quick Links

Lite
Professional Balance Charger / Discharger
/
220
13
Watts
Improper usage may lead to fire,
property damage and physical injury.
Before charging, read the instructions.
Never leave the charger unattended during charging in process.
Place the charger and battery on a non-flammable surface,
and keep away from inflammables while charging.
INTRODUCTION
Congratulations on your choice of SkyRC B6 Lite. The operation and UI
has been optimized to be hassle-free for basic usage. These operating
instructions are designed to ensure that you quickly become familiar
Multiple safety protections are implemented, such as, reverse polarity
protection, charging time limit, charging capacity limit.
The operation of a multi-chemistry battery charger does require certain
knowledge on the part of
the user. Please BE SURE to read these
INSTRUCTIONS, WARNING and SAFETY NOTES before you use the
charger. It can be dangerous, fire or explosion, if misoperation happens.
We hope you have years of pleasure and success with your new battery
charger.
Amps
100151
Version 1.0
Scan for B6 Lite instruction manual
or download through www.skyrc.com
DC Input Socket
DC 7-32V
LCD Display
Start / Stop Button
Increase Button
Decrease Button
Output Socket
Balance Lead Socket

Advertisement

loading

Summary of Contents for Skyrc B6 Lite

  • Page 1 Place the charger and battery on a non-flammable surface, and keep away from inflammables while charging. Decrease Button INTRODUCTION Congratulations on your choice of SkyRC B6 Lite. The operation and UI DC Input Socket has been optimized to be hassle-free for basic usage. These operating DC 7-32V...
  • Page 2 OPERATING PROGRAM 1. Connect the charger to DC power supply or Pb battery. 3. Wish you a pleasant journey with B6 Lite! Important Notice To take advantage of B6 Lite’s full power capability, SPECIFICATION the power source should be 7-32V DC, and output...