Warning And Safety Notes - Skyrc IMAX B6 V2 Instruction Manual

Professional balance charger/discharger

Hide thumbs

Table of Contents

Special Features

Storage Mode of Lithium Battery

"STORAGE" has the capacity to control the final battery voltage,

which is necessary and helpful for a rarely used battery.

Re-Peak Mode of NiMH/NiCd Battery

In re-peak charge mode, the charger can peak charge the battery

once, twice or three times in a row automatically. This is good for

making the battery fully charged.

Cyclic Charging/Discharging

1 to 5 cyclic and continuous process of charge > discharge or

discharge > charge is operable for battery refreshing and balancing

to stimulate the battery's activity.

Battery Voltage Meter

The user can check battery's total voltage, the highest voltage, the

lowest voltage and each cell's voltage.

Battery Internal Resistance Meter

The user can check battery voltage and battery internal resistance.

Capacity Limit

The charging capacity is always calculated as the charging current

multiplied by time. If the charging capacity exceeds the limit, the

process will be terminated automatically when you set the maximum

value.

Processing Time Limit

You can also limit the maximum process time to avoid any possible

defect.

Temperature Threshold*

The battery's internal chemical reaction will cause the temperature of

the battery to rise. If the temperature limit is reached, the process will

be terminated.

* This function is only available by connecting optional temperature

probe, which is not included in the package.

· 04

These warnings and safety notes are particularly important.

Please follow the instructions for maximum safety;

otherwise the charger and the battery can be damaged or at

worst it can cause a fire.

Never leave the charger unattended when it is connected to its

power supply. If any malfunction is found, TERMINATE THE

PROCESS AT ONCE and refer to the operation manual.

Keep the charger well away from dust, damp, rain, heat, direct

sunshine and vibration. Never drop it.

The allowable DC input 11-18V.

This charger and the battery should be put on a heat-resistant,

noninflammable and nonconductive surface. Never place them on

a car seat, carpet or similar. Keep all the inflammable volatile

materials away from operating area.

Make sure you know the specifications of the battery to be

charged or discharged to ensure it meets the requirements of this

charger. If the program is set up incorrectly, the battery and

charger may be damaged .It can cause fire or explosion due to

overcharging.

Standard Battery Parameters

LiPo

Nominal

3.7V/cell

Voltage

Max Charge

4.2V/cell

Voltage

Storage

3.8V/cell

Voltage

Allowable

≦1C

Fast Charge

Min. Discharge

3.0-3.3V/cell 2.9-3.2V/cell 2.6-2.9V/cell

Voltage

Be very careful to choose the correct voltage for different types of

battery otherwise you may cause damage to the batteries. Incorrect

settings could cause the cells to fire or explode.

B6 V2