Related Manuals for Skyrc B6AC+ DUAL POWER
Summary of Contents for Skyrc B6AC+ DUAL POWER
- Page 1 Version 2 AC/DC Professional Balance Charger/Discharger SkyRC Technology Co., Ltd. 2014 Version 1.0...
-
Page 2: Table Of Contents
TABLE OF CONTENTS INTRODUCTION SPECIAL FEATURES WARNING AND SAFETY NOTES PROGRAM FLOW CHART OPERATION OPERATING PROGRAM CHARGING PROGRAM BATTERY MEMORY SET AND CALL OUT SYSTEM SETTING BATTERY METER BATTERY RESISTANCE METER WARNING AND ERROR MESSAGE USING THE CHARGE CONTROL SOFTWARE “CHARGE MASTER” THE SET CONTAINS SPECIFICATION CONFORMITY DECLARATION... -
Page 3: Introduction
AC/DC Input Professional Balance Charger/Discharger. This unit is simple to use, but the operation of a sophisticated automatic charger such as SKYRC B6AC+ does require some knowledge on the part of the user. These operating instructions are designed to ensure that you quickly become familiar with its functions. - Page 4 INTRODUCTION Please read this entire operating manual completely and attentively before using this product, as it covers a wide range of information on operating and safety. Or please do use this product in company with a specialist! LCD Display Balance Lead Socket Scroll Through the Main Menu JST-XH Ports Stop Any Charge Processes...
-
Page 5: Special Features
Adaptable to Various Type of Lithium Battery SKYRC B6AC+ V2 is adaptable to various types of lithium batteries, such as LiPo, LiIon and the new LiFe series of batteries. - Page 6 SPECIAL FEATURES Fast and Storage Mode of Lithium Battery Purposes to charge lithium battery varies, 'fast' charge reduce the duration of charging, whereas 'store' state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.
-
Page 7: Warning And Safety Notes
WARNING AND SAFETY NOTES These warnings and safety notes are particularly important. Please follow the instructions for maximum safety; otherwise the charger and the battery can be damaged or at worst it can cause a fire. Never leave the charger unattended when it is connected to its power supply. If any malfunction is found, TERMINATE THE PROCESS AT ONCE and refer to the operation manual. - Page 8 WARNING AND SAFETY NOTES Never attempt to charge or discharge the following types of batteries. A battery pack which consists of different types of cells (including different manufacturers) A battery that is already fully charged or just slightly discharged. Non-rechargeable batteries (Explosion hazard). Batteries that require a different charge technique from NiCd, NiMh, LiPo or Gel cell (Pb, Lead acid).
- Page 9 WARNING AND SAFETY NOTES Attention should be paid to the connection of lithium battery especially. Do not attempt to disassemble the battery pack arbitrarily. Please get highlighted that lithium battery packs can be wired in parallel and in series. In the parallel connection, the battery s capacity is calculated by multiplying single battery capacity by the number of cells with total voltage stay the same.
-
Page 10: Program Flow Chart
PROGRAM FLOW CHART START LiPo BALANCE CHG LiPo CHARGE LiPo FAST CHARGE LiPo STORAGE LiPo DISCHARGE BATT/PROGRAM 2.0A 7.4V (2S) 2.0A 7.4V (2S) 2.0A 7.4V (2S) 2.0A 7.4V (2S) 2.0A 7.4V (2S) LiPo BATT ENTER START LiFe BALANCE CHG LiFe CHARGE LiFe FAST CHARGE LiFe STORAGE LiFe DISCHARGE... -
Page 11: Operation
OPERATION BATT PROG / STOP Button: It is used to stop the progress or go back to previous step/screen DEC Button: It is used to go through the menus and decrease the parameter value INC Button: It is used to go through the menus and increase the parameter value ENTER / START Button: It is used to enter parameter or store parameter on screen. -
Page 12: Operating Program
Li-Po BALANCE CHARGE program for example, 1. Connection Connecting to power source SKYRC B6AC+ V2 comes with the built in switching power supply. You can connect the AC power cord directly to the main AC socket. (100-240V AC). Connecting the battery Important!!! Before connecting a battery it is absolutely essential to check one last time that you have set the parameters correctly. - Page 13 OPERATING PROGRAM 2. Getting started Locate the flowcharts show the entire programming menu. It is highly recommended to have these flowcharts handy while learning to operate this charger. There are two main ways in which to set the charger. A memory profile is available for setting and storing pertinent information for up to 10 different batteries.
-
Page 14: Various Information During The Process
OPERATING PROGRAM R shows the number of cells detected by the charger and S is the R : 3 S E R S : 3 S E R number of cells set by you at the previous screen. If both numbers C O N F I R M ( E N T E R ) are identical, press START/ENTER to start charging process. -
Page 15: Charging Program
OPERATING PROGRAM 8. Program Stop During the charging process, press STOP to stop the charging process. 9. Program Complete When the charging process finishes, an audible sound will be heard. Charging Program Depends on different battery type, the operation programs are different. Batt Operation Description... -
Page 16: Battery Memory Set And Call Out
BATTERY MEMORY SET AND CALL OUT The charger can store up to 10 different charge/discharge profiles for your convenience, and the stored profiles can be recalled quickly without having to go through the setup process. When you are willing to alter the parameter value in the program, press START/ENTER to make it blink then change the value with INC or DEC. - Page 17 BATTERY MEMORY SET AND CALL OUT S A V E P R O G R A M S A V E … . [ B A T T M E M O R Y 1 ] Indicate the battery type and battery cell of the saved profile. L i P o 7 .
-
Page 18: System Setting
SYSTEM SETTING It will be operated with the default value of the essential user settings when it is powered on for the first time.The screen displays the following information in sequence and the user can change the value of parameter on each screen. When you are willing to alter the parameter value in the program, press START/ENTER to make it blink then change the value with INC or DEC. - Page 19 SYSTEM SETTING ITEM SELECTION DESCRIPTION N i M H S e n s i t i v i t y This program is for NiMH/NiCd battery only. D . P e a k D e f a u l t Default: 4mV/Cell When the charger detects the delta peak value reaches the value you set, the...
-
Page 20: Battery Meter
BATTERY METER The user can check battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage. Please connect the battery to the charger main battery lead to battery socket and balance wires to balance socket. 4.19 4.15 4.18V 4.15 4.19... -
Page 21: Battery Resistance Meter
BATTERY RESISTANCE METER The user can check battery's total resistance, the highest resistance, the lowest resistance and each cell's resistance. Please connect the battery to the charger main battery lead to battery socket and balance wires to balance socket. m Ω 0 0 5 0 0 3 0 0 3 0 0 5 m Ω... -
Page 22: Warning And Error Message
WARNING AND ERROR MESSAGE In case of an error the screen will display the cause of error and emit an audible sound. Incorrect polarity connected. The battery is interrupted. C O N N E C T E R R O R The battery connection is wrong. -
Page 23: Using The Charge Control Software "Charge Master
USB cable which is not included in this package. The cable must be terminated on one end with “A” plug and the opposite end is terminated with “micro-B” plug which can connect to charger directly. The “Charge Master” can be download from www.skyrc.com. THE SET CONTAINS 1. SKYRC iMAX B6AC+ V2 Charger 2. -
Page 24: Specification
SPECIFICATION DC Input Voltage : 11-18V AC Input Voltage: 100-240V Display Type: 2x16 LCD Display Backlight: Blue Case Material: Metal Controls: Four Buttons Case Size: 135x144x36mm Weight: 632g PC Communications: USB Port for PC Control & Firmware Upgrade External Port: 2-6S Balance Socket-XH, Temperature Probe Socket, Battery Socket, DC Input, Micro USB Port for PC. -
Page 25: Conformity Declaration
CONFORMITY DECLARATION SKYRC B6AC+ V2 satisfy all relevant and mandatory CE directives and FCC Part 15 Subpart B: 2010. For EC directives: The product has been tested to meet the following technical standards: EN 55014-1: Electromagnetic Compatibility - EN 55014-1:2006+... -
Page 26: Commonly Used Terms
COMMONLY USED TERMS Commonly used terms Final charge voltage: the voltage at which the battery's charge limit (capacity limit) is reached. The charge process switches from a high current to a low maintenance rate (trickle charge) at this point. From this point on further high current charging would cause overheating and eventual terminal damage to the pack. -
Page 27: Warranty And Service
Liability exclusion This charger is designed and approved exclusively for use with the types of battery stated in this Instruction Manual. SkyRC accepts no liability of any kind if the charger is used for any purpose other than that stated. - Page 28 Manufactured by SKYRC TECHNOLOGY CO., LTD. www.skyrc.com All specifications and figures are subject to change without notice. Printed in China 2014.04 7504-0475-01...