Installing The Air Filter In The Top Hood; Installing Transceiver Modules - H3C S12508CR Installation, Quick Start

Figure 3-22 Installing a power tray

Installing the air filter in the top hood

1. Unpack the air filter.
2. Position the air filter over the top hood, and then push the air filter until it is seated into the top
hood.
Figure 3-23 Installing the air filter in the top hood

Installing transceiver modules

CAUTION:
If you are not to use a fiber port or transceiver module, insert dust plugs into the port or module. If
you are not to connect an optical fiber, install dust caps for the fiber connector.
23