Cisco SPA 525G2 Administration Manual page 87

Customizing Cisco SPA and Wireless IP Phones
Configuring Lightweight Directory Access Protocol (LDAP) for the Cisco SPA 300 Series and Cisco SPA
500 Series IP Phones
STEP 5
NOTE
STEP 6
STEP 7
STEP 8
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide
In the Optional Network Configuration section, under Domain, enter the LDAP
domain. (Only required if using Active Directory with authentication set to MD5.)
Some sites may not deploy DNS internally and instead use Active Directory 2003.
In this case, it is not necessary to enter a Primary DNS address and an LDAP
Domain. However, with Active Directory 2003, the authentication method is
restricted to Simple.
Click the Phone tab.
Under LDAP Corporate Directory Search, in the LDAP Dir Enable field, choose yes
to enable LDAP and cause the name defined in LDAP Corp Dir Name to appear in
the phone's Directory menu.
Configure values for the fields in the following table and click Submit All Changes.
Parameter
LDAP Corp Dir Name
LDAP Server
LDAP Auth Method
Description
Enter a free-form text name, such as "Corporate
Directory."
Enter a fully qualified domain name or IP address of
LDAP server, in the following format:
nnn.nnn.nnn.nnn
Enter the host name of the LDAP server if the MD5
authentication method is used.
Select the authentication method that the LDAP
server requires. Choices are:
•
None—No authentication is used between the
client and the server.
•
Simple—The client sends its fully-qualified
domain name and password to the LDAP server.
May present security issues.
•
Digest-MD5—The LDAP server sends
authentication options and a token to the client.
The client returns an encrypted response that is
decrypted and verified by the server.
3
75