Cisco SPA 525G2 Administration Manual page 246

Cisco SPA IP Phone Field Reference
Regional Tab
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide
Parameter
Busy Tone
Reorder Tone
Off Hook Warning Tone
Ring Back Tone
Call Waiting Tone
Confirm Tone
SIT1 Tone
SIT2 Tone
Description
Played when a 486 RSC is received for an outbound
call.
Defaults to 480@-19,620@-19;10(.5/.5/1+2).
Played when an outbound call has failed or after the far
end hangs up during an established call. Reorder Tone
is played automatically when <Dial Tone> or any of its
alternatives times out.
Defaults to 480@-19,620@-19;10(.25/.25/1+2).
Played when the caller has not properly placed the
handset on the cradle. Off Hook Warning Tone is
played when Reorder Tone times out.
Defaults to 480@10,620@0;10(. 1 25/. 1 25/1+2).
Played during an outbound call when the far end is
ringing.
Defaults to 440@-19,480@-19;*(2/4/1+2).
Played when a call is waiting. Defaults to 440@-
10;30(.3/9.7/1)
Brief tone to notify the user that the last input value has
been accepted.
Defaults to 600@-16; 1(.25/.25/1).
Alternative to the Reorder Tone played when an error
occurs as a caller makes an outbound call. The RSC to
trigger this tone is configurable on the SIP screen.
Defaults to 985@-16,1428@-16,1777@-16;20(.380/0/
1,.380/0/2,.380/0/3,0/4/0).
Alternative to the Reorder Tone played when an error
occurs as a caller makes an outbound call. The RSC to
trigger this tone is configurable on the SIP screen.
Defaults to 914@-16,1371@-16,1777@-16;20(.274/0/
1,.274/0/2,.380/0/3,0/4/0).
B
234