Steps - Fujitsu PRIMERGY RX2520 M1 Upgrade And Maintenance Manual

Conversion configurations

15.3.2.10 Steps

"Disabling or suspending BitLocker functionality" on page 67
Ê
"Shutting down the server" on page 51
Ê
"Disconnecting power cords" on page 52
Ê
Ê Remove all external cables.
"Getting access to the component" on page 53
Ê
"Removing the fan box" on page 168
Ê
"Removing the front cover" on page 376
Ê
Ê Remove the HDD modules and HDD dummy modules, see
3.5-inch HDD module" on page 141
module" on page
Ê Remove the HDD cage 1, see
Ê Remove the 4x2.5-inch HDD backplanes from cage 2 and 3, see
the 4x 2.5-inch SAS HDD backplane" on page 143
Ê Install the HDD cage 1
"Installing the 12x 2.5-inch HDD SAS backplane" on page 148
Ê
Ê Installing the HDD modules or HDD dummy modules, see
inch HDD / SSD module" on page 129
module" on page
"Installing the front cover 2.5-inch version" on page 377
Ê
Ê For more information about the cabling, see
"Installing the fan box" on page 171
Ê
"Reassembling" on page 59
Ê
Ê Connect all external cables.
"Connecting the server to the power source" on page 64
Ê
Ê Update your server's chassis information on the Chassis ID EPROM
integrated into the front panel board. For further information on how to obtain
and use the ChassisId_Prom Tool, refer to section
Prom Tool" on page
"Enabling BitLocker functionality" on page 93
Ê
388
128.
"Removing a HDD cage" on page 158
"Installing a HDD cage" on page 159
132.
97.
Upgrade and Maintenance Manual
and "Removing a 2.5-inch dummy
and "Installing a 2.5-inch dummy
"Configuration 7" on page
"Using the Chassis ID
"Removing a
"Removing
"Installing a 2.5-
407.
RX2520 M1