Installing The 3.5-Inch Hdd Sas / Sata Backplane - Fujitsu PRIMERGY RX2520 M1 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
Ê Remove the 3.5-inch HDD SAS / SATA backplane.
7.4.3.4

Installing the 3.5-inch HDD SAS / SATA backplane

Figure 62: Installing the 3.5-inch HDD SAS / SATA backplane (A)
Ê At a slight angle insert the 3.5-inch HDD SAS / SATA backplane between
the punching and the centering pin.
Ê Push the3.5-inch HDD SAS / SATA backplane in the direction of the arrow.
I
Ensure that the four centering pins project through the recesses in the
backplane.
154 Upgrade and Maintenance Manual
RX2520 M1