Table of Contents
Advertisement
Conversion configurations
15.3.2.2 Steps
"Disabling or suspending BitLocker functionality" on page 67
Ê
"Shutting down the server" on page 51
Ê
"Disconnecting power cords" on page 52
Ê
Ê Remove all external cables.
"Getting access to the component" on page 53
Ê
"Removing the fan box" on page 168
Ê
"Removing the front cover" on page 376
Ê
Ê Remove the HDD cage 2, see
"Installing the 4x 2.5-inch HDD SAS backplane" on page 144
Ê
Ê Installing the HDD cage 2,
"Installing a 2.5-inch HDD / SSD module" on page 129
Ê
inch dummy module" on page 132
Ê For more information about the cabling see
"Installing the fan box" on page 171
Ê
"Installing the front cover 2.5-inch version" on page 377
Ê
"Reassembling" on page 59
Ê
Ê Connect all external cables.
"Connecting the server to the power source" on page 64
Ê
Ê Update your server's chassis information on the Chassis ID EPROM
integrated into the front panel board. For further information on how to obtain
and use the ChassisId_Prom Tool, refer to section
Prom Tool" on page
"Enabling BitLocker functionality" on page 93
Ê
15.3.2.3 Configuration 2 to configuration 7
I
The configuration 2 must include a SAS controller. Otherwise you must
install a SAS controller as described in section
controller" on page
382
"Removing a HDD cage" on page
see"Installing a HDD cage" on page
97.
191.
Upgrade and Maintenance Manual
and
"Installing a 2.5-
"Configuration 4" on page
"Using the Chassis ID
"Installing the SAS RAID
158.
159.
402.
RX2520 M1
Advertisement
Table of Contents
