Removing A Slot Bracket - Fujitsu PRIMERGY RX2520 M1 Upgrade And Maintenance Manual

Expansion cards and backup units
Figure 84: Mounting the PCI slot bracket (B)
Ê Secure the slot bracket to the controller with the two M3 x 5 mm screws
contained in the expansion card kit.
9.2.2

Removing a slot bracket

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
Removing the slot bracket
Ê Remove the two screws.
Ê Remove the controller from the mounting tabs on the slot bracket.
182 Upgrade and Maintenance Manual
Hardware: 5 minutes
RX2520 M1