System board and components
Ê Set the TPM Support and TPM State settings to Enabled.
Ê Under Pending TPM operation, select the desired TPM operation mode.
Ê Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify
settings, refer to the corresponding BIOS Setup Utilty reference
manual available online at
http://jp.fujitsu.com/platform/server/primergy/manual/.
"Switching on the server" on page 66
Ê
"Enabling BitLocker functionality" on page 93
Ê
350
Upgrade and Maintenance Manual
RX2520 M1