Table of Contents
Advertisement
The hooks on the air duct will lock in the narrow ends of the keyhole slots on
the FBU holder.
Ê Ensure that the locking handle on the FBU holder properly snaps in place .
9.5.2.6
Installing the air duct with an FBU
Figure 102: Connecting the FBU to the controller
Ê Insert the air duct.
Ê Connect the FBU cable to the RAID controller.
Ê Route the cable in such a way that the cable is not pinched under the air
duct.
9.5.2.7
Concluding steps
"Reassembling" on page 59
Ê
"Connecting the server to the power source" on page 64
Ê
"Switching on the server" on page 66
Ê
Ê If applicable,
"Updating RAID controller firmware" on page
"Enabling SVOM boot watchdog functionality" on page 87
Ê
RX2520 M1
Upgrade and Maintenance Manual
Expansion cards and backup units
79.
205
Advertisement
Table of Contents
