Installing A 2.5-Inch Dummy Module - Fujitsu PRIMERGY RX2520 M1 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY RX2520 M1:

Table of Contents

Hard disk drives / solid state drives

Figure 39: Removing a 2.5-inch HDD / SSD module

Ê Pull the HDD / SSD module completely out of its bay.

Installing a 2.5-inch dummy module

If the removed HDD / SSD module is not replaced immediately, always

replace a dummy module into the unused HDD / SSD bay to comply with

applicable EMC regulations and satisfy cooling requirements.

Upgrade and Maintenance Manual