GRAPHTEC CS400 User Manual page 34

3. PREPARING TO OPERATE THE SCANNER
For Windows XP
The procedure outlined below assumes that the CS400 is connected in your system.
Substitute CS300-10 for CS400-10 for guidelines as to how to use the CS300.
(1) Launch the Control Panel using the Start menu.
(2) The screen shown below is displayed when you click on the "Printers and Other
Hardware" icon.
(3) The screen shown below is displayed when you click on the "Scanners and Cameras"
icon.
Ensure that "Graphtec CS400-10" or "Graphtec CS300-10" is indicated here.
3 – 12 CS400/300