GRAPHTEC CS400 User Manual page 19

Rear View
IEEE 1394
connector
USB connector
Power switch
Controls the on/off status of the power supply to the scanner.
AC line inlet
Connect the power cord's female plug here.
USB connector
Used to connect the USB interface cable.
IEEE 1394 connector
Used to connect the IEEE 1394 interface cable.
The USB and IEEE 1394 connectors cannot be used at the same time. Do not connect
both the USB and IEEE 1394 cables to a computer, or to two separate computers,
at the same time.
CS400/300
2. PREPARATION
Power switch
AC line inlet
2 – 5