Introduction; Purpose Of This Manual; Electric/Electronic Ovens; Dismantling Built-In Ovens - Electrolux Built-in Ovens Service Manual

Hide thumbs Also See for Built-in Ovens:

Table of Contents

1. INTRODUCTION

1.1 -

The purpose of this Manual is to provide a general outline of the methods of accessing the

various versions of ACCESS ovens.

2 - ELECTRIC / ELECTRONIC OVENS

IMPORTANT: Always disconnect the appliance from the power socket before accessing

internal parts.

Access to certain components is possible by pulling the oven partially out of the compartment.

With the oven partially pulled out, the service engineer can access the components of the

front panel and the electronic control unit; for access to the other components located in the

rear section, it is necessary to remove the built-in oven completely from its compartment.

To remove the oven:

1. Remove the 4 screws, located at the front of the front panel, which secure the appliance to

the compartment (see Fig. 1 and 2)

Fig. 1

2. Remove the oven

(Fig. 3).

Fig. 3

SOI 04.04 FV

Fig. 2

5/50

599 35 96-40

Table of Contents

Show Quick Links

Table of Contents

Built-in oven