Fig. 78
1. IGNITER
2. THERMOCOUPLE
3. IGNITER /
THERMOCOUPLE
SUPPORT
3.9.3. REMOVING THE OVEN THERMOCOUPLE (electromechanical models only)
After removing the bottom panel, proceed as follows to remove the oven thermocouple
1. Remove the screw which secures the thermocouple in position (fig. 79, pos. 3).
2. Detach the thermocouple connector (fig. 61, pos. 6, page 34)
Fig. 79
1. OVEN BURNER
2. SUPPORT SCREW
3. THERMOCOUPLE
SCREW
4. THERMOCOUPLE
5. THERMOCOUPLE /
IGNITER SUPPORT
SOI 04.04 FV
42/50
599 35 96-40