Adjusting The Minimum Setting Of The Oven Burner - Electrolux Built-in Ovens Service Manual

3.13. ADJUSTING THE MINIMUM SETTING FOR THE OVEN BURNER
(electromechanical models only)
Proceed as follows:
1. Disconnect the appliance from the power supply
2. Remove all the knobs.
3. Open the oven door completely and locate the ventilation grille (immediately beneath the
control panel).
4-. Remove the protective rubber caps from the grille. Remove the two screws and remove
the grille (fig. 91, pos. A)
Fig. 91
A. VENTILATION GRILLE
SCREWS
5. Remove the control panel. To do so, remove the screws located under the lower edge (fig.
92, pos. B).
Fig. 92
B. CONTROL PANEL
SCREWS
SOI 04.04 FV 48/50 599 35 96-40