Removing The Gas Thermostat (Electromechanical Versions Only) - Electrolux Built-in Ovens Service Manual

3.7.4. REMOVING THE GAS THERMOSTAT (electromechanical models only)
In order to remove the gas thermostat, first disconnect the appliance from the electrical power
supply and the shut off the gas supply. Then remove the upper panels from the oven. To so,
proceed as follows:
1. Detach the gas delivery pipe which supplies the oven burner (fig. 61, pos. 8); for models
with a gas grill, detach the pipe to the grill also.
2. Remove the front control panel.
3. Remove the two screws which secure the gas delivery pipe, which acts as a support for
the gas thermostat (the thermostat is secured in the front section of the area beneath the
control panel) (fig. 63, pos. 2).
4. Detach the connector wire from the thermocouple (fig, 61, pos. 6).
5. Remove the two screws which secure the thermostat to the gas delivery pipe (fig. 62, pos.
2).
6. Slide out the thermostat bulb from the upper part of the muffle and release it from the
retaining spring (figg. 64 and 65, pos. 1 and 2).
Fig. 61
1. GRILL EXCLUSION
MICROSWITCH LEVER
2. "ON" MICROSWITCH
3. PILOT LAMPS
4. GAS THERMOSTAT
5. GAS DELIVERY PIPE
6. THERMOCOUPLE
CONNECTION
7. THERMOSTAT SENSOR
CAPILLARY
8. GAS DELIVERY PIPE TO
OVEN BURNER
Fig. 62
1. GAS THERMOSTAT
2. THERMOSTAT SCREWS
3. GAS DELIVERY PIPE
SOI 04.04 FV 35/50 599 35 96-40