Disconnecting From The Power Supply; Removing The Control Panel - Electrolux Built-in Ovens Service Manual

2.2. DISCONNECTING FROM THE POWER SUPPLY

IMPORTANT: Before accessing any of the components inside the oven, it is essential to
disconnect the oven from the power supply by removing the plug from the power socket or by
turning the main switch on the domestic circuit (if featured) to "OFF".

2.3 - REMOVING THE CONTROL PANEL

In order to remove the control panel, first remove the rubber knob caps and, where featured,
the knobs.
1. Open the oven door.
2. Slide off the rubber knob caps (and the control knobs).
3. Remove the two screws from the lower section of the front panel (see Fig. 4 and 5).
4. Slide the control panel upwards and release from the upper retaining tabs.
Fig. 4
Positions of the
screws which secure
the front panel
Fig. 5
CONTROL PANEL
1 -
2. SCREW
3. OVEN FRONT
PANEL
4. FRONT PANEL
SEALING RING
SOI 04.04 FV 6/50 599 35 96-40