Removing The Grill Burner Protection; Removing The Grill Burner - Electrolux Built-in Ovens Service Manual

3.10. REMOVING THE GRILL BURNER COVER
First disconnect the appliance from the electrical power supply and the shut off the gas
supply. Then remove the grill burner cover as follows:
1. Remove the two screws which secure the burner cover in position. These screws are
located on the inner side of the oven top (fig. 80).
Fig. 80
1. OVEN FRONT PANEL
2. FRONT PANEL SEAL
3. GRILL COVER
4. SCREWDRIVER

3.11. REMOVING THE GRILL BURNER

First disconnect the appliance from the electrical power supply and the shut off the gas
supply. Then proceed as follows:
1. Remove the two screws which secure the grill burner to the top of the oven (fig. 81, pos.
1).
Fig. 81
1. GRILL BURNER
SCREWS
2. GRILL BURNER
DEFLECTOR
3. RETAINING SPRING
FOR THERMOSTAT
BULB
4. THERMOSTAT BULB
5. OVEN LAMP
6. GRILL BURNER
7. IGNITER /
THERMOCOUPLE
SUPPORT BRACKET
8. SCREWDRIVER
SOI 04.04 FV 43/50 599 35 96-40