Electrolux Built-in Ovens Service Manual page 12

1. Remove the screws which secure the smaller upper panel
Fig. 15
Screws securing the smaller
upper panel
Fig. 16
1. PILOT LIGHT
2. OVEN THERMOSTAT
3. END-OF-COOKING
THERMOSTAT
4. FUNCTION SELECTOR
If it should be necessary to remove a control component (oven thermostat, function selector,
energy regulator, pilot lamps etc.), proceed as follows:
1. Remove the front control panel.
2. Detach the wires from the component (note the position of each).
3. Remove the screws which secure the component (from the front section, beneath the front
control panel)
4. Remove the component.
SOI 04.04 FV
ELECTROMECHANICAL VERSION
12/50 599 35 96-40