Removing The Igniter; Removing The Igniter / Thermocouple Support - Electrolux Built-in Ovens Service Manual

3.9.1. REMOVING THE IGNITER

Fig. 76
1. IGNITER
2. SEGER RING
3. SCREWDRIVER
4. OVEN BURNER
5. IGNITER /
THERMOCOUPLE
SUPPORT

3.9.2. REMOVING THE IGNITER / THERMOCOUPLE SUPPORT

Proceed as follows to remove the igniter / thermocouple support:
1. Remove the bottom panel.
2. Remove the screws which secure the igniter / thermocouple support (fig. 77, pos. 2).
3. Remove the oven burner (see page 38).
4. Remove the thermocouple and the igniter from the support.
Fig. 77
1. IGNITER
2. SCREWS ON
IGNITER /
THERMOCOUPLE
SUPPORT
3. THERMOCOUPLE
4. OVEN BURNER
SOI 04.04 FV 41/50 599 35 96-40