Removing The Control Panel - Electrolux Built-in Ovens Service Manual

3.4. REMOVING THE CONTROL PANEL

To remove the control panel, first remove the rubber key covers and the knobs (if any). Then
proceed as follows:
1. Open the oven door.
2. Remove the knobs.
3. Remove the steam venting grille.
4. Remove the two screws from the lower section of the front panel.
5. Remove the front panel by pulling upwards until the upper anchor tabs are released
Fig. 50
Position of the screws
on the front panel
1. HOLE FOR STEAM VENTING GRILLE
SCREW
2. SCREW HEAD CAP
3. STEAM VENTING GRILLE
1. CONTROL PANEL
2. CONTROL PANEL SCREW
SOI 04.04 FV
Fig. 51
Fig. 52
29/50 599 35 96-40