Removing The External Glass Panel - Electrolux Built-in Ovens Service Manual

Fig. 26
1 - HINGE ARREST LEVER
(IN LOCKED POSITION)
2. HINGE
N.B. :. When replacing the door, remember to raise the hinge arrest lever fully to its original
position before re-closing the door.

2.8.1. REMOVING THE EXTERNAL GLASS PANEL

First, remove the door from the oven. Then proceed as follows:
1. Remove the two screws from the lower section of the inner door (see Fig 27, Pos. 5)
2. Slide the glass panel upwards to release it from the anchor plate.
Fig. 27
1 - INNER DOOR
2. EXTERNAL DOOR GLASS
3. HINGE (RIGHT)
4. HINGE SCREW
SOI 04.04 FV
5 - SCREWS SECURING THE EXTERNAL
GLASS PANEL
6. HINGE SCREW
7. HINGE (LEFT)
8. INTERNAL GLASS PANEL
17/50 599 35 96-40