Table of Contents
Advertisement
B
GENERAL INFORMATION
WARNING
Refer to "WARNING and Safety
Information"
B.1
Introduction
Given below is some information regarding the intended use of
this appliance, its testing, and a description of the symbols
used (that identifies the type of warning), the definitions of
terms used in the manual and useful information for the
appliance user.
B.2
Additional indications
The drawings and diagrams given in the manual are not in
scale. They supplement the written information with an outline,
but are not intended to be a detailed representation of the
machine supplied.
The numerical values given on the machine installation
diagrams refer to measurements in millimeters and/or inches.
B.3
Intended use and restrictions
This appliance is designed for cooking food. It is intended for
collective use.
Any other use is deemed improper.
CAUTION
The machine is not suitable for installation
outdoors and/or in places exposed to
atmospheric agents (rain, direct sunlight,
etc.).
NOTE!
The manufacturer declines any liability for
improper use of the product.
B.4
Testing and inspection
Our appliances have been designed and optimized, with
laboratory testing, in order to obtain high performance and
efficiency.
The product is shipped ready for use.
Passing of the tests (visual inspection - electrical test -
functional test) is guaranteed and certified by the specific
enclosures.
B.5
Copyright
This manual is intended solely for consultation by the operator
and can only be given to third parties with the permission of
Electrolux Professional SpA.
B.6
Keeping the manual
The manual must be carefully kept for the entire life of the
machine, until scrapping. The manual must stay with the
machine in case of transfer, sale, hire, granting of use or
leasing.
B.7
Recipients of the manual
This manual is intended for:
• the carrier and handling personnel;
• installation and commissioning personnel;
• the employer of machine users and the workplace
manager;
• operators for normal machine use;
• specialised personnel - Customer Care service (see service
manual).
10
B.8
Definitions
Listed below are the definitions of the main terms used in the
manual. It is advisable to read them carefully before use.
Operator
machine installation, adjustment, use,
maintenance, cleaning, repair and trans-
port personnel.
Manufacturer
Electrolux Professional SpA or any other
service centre authorised by Electrolux
Professional SpA.
Operator for
an operator who has been informed and
normal
trained regarding the tasks and hazards
machine use
involved in normal machine use.
Customer
an operator instructed/trained by the
Care service
Manufacturer and who, based on his
or specialised
professional and specific training, experi-
personnel
ence and knowledge of the accident-
prevention regulations, is able to appraise
the operations to be carried out on the
machine and recognise and prevent any
risks. His professionalism covers the
mechanical, electrotechnical and elec-
tronics fields etc.
Danger
source of possible injury or harm to health.
Hazardous
any situation where an operator is
situation
exposed to one or more hazards.
Risk
a combination of probabilities and risks of
injury or harm to health in a hazardous
situation.
Protection
safety measures consisting of the use of
devices
specific technical means (guards and
safety devices) for protecting operators
against risks.
Guard
an element of a machine used in a specific
way to provide protection by means of a
physical barrier.
Safety device
a device (other than a guard) that elimi-
nates or reduces the risk; it can be used
alone or in combination with a guard.
Customer
the person who purchased the machine
and/or who manages and uses it (e. g.
company, entrepreneur, firm).
Electrocution
an accidental discharge of electric current
on a human body.
B.9
Responsibility
The Manufacturer declines any liability for damage and
malfunctioning caused by:
• non-compliance with the instructions contained in this
manual;
• repairs not carried out in a workmanlike fashion, and
replacements with parts different from those specified in
the spare parts catalogue (the fitting and use of non-original
spare parts and accessories can negatively affect machine
operation and invalidates the original manufacturer
warranty);
• operations carried out by non-specialised personnel;
• unauthorized modifications or operations;
• missing, lack or inadequate maintenance;
• improper machine use;
• unforeseeable extraordinary events;
• use of the machine by uninformed and / or untrained
personnel;
• non-application of the current provisions in the country of
use, concerning safety, hygiene and health in the workplace.
The Manufacturer declines any liability for damage caused by
arbitrary modifications and conversions carried out by the user
or the Customer.
The employer, workplace manager or service technician are
responsible for identifying and choosing adequate and suitable
Advertisement
Table of Contents
