Replacing The Oven Bulb; Removing The Oven Door - Electrolux EON6001S User Information

REPLACING THE BULB
Important: Unplug the appliance from the electrical power supply.
Check that the oven is at room temperature, otherwise wait for it to cool.
Remove the side rack.
To replace the oven bulb B (fig. 1), remove the protective cover A by turning it anti-
clockwise. Replace the burnt-out bulb and fit the protective cover back in place A.
Note: Use only 25 W, E-14 type, T 300°C bulbs.
The lamp used in this appliance is a 'special purpose lamp' intended only for the
usage with this appliance; is not intended for household room illumination.

REMOVING THE OVEN DOOR

To aid cleaning and make access to the oven interior easier, both oven doors can
be simply removed. To make the cleaning operation easier, the door
can be removed from the hinges as follows:
The hinges A (fig. 2) are provided with two movable bolts B.
When bolt B is raised, the hinge is released from its housing. Having done this,
the door must be lifted upwards and removed, sliding it towards the outside;
grip the sides of the door near the hinges when performing these operations.
To refit the door, firstly slide the hinges into their slots.
Before closing the door, remember to rotate the two movable bolts B used to hook
the two hinges. Do not soak the door in water.
Door glass
The door glass can easily be removed and cleaned by unscrewing the side screws.
Fig. 1 Fig. 2
B
A
15