REAR SUSPENSION
Spring Pre-load Adjustment
The adjustment can be performed by chang-
ing the adjuster ring position. However,
Suzuki recommends that this adjustment be
done by your authorized Suzuki dealer,
since a special tool is needed for this job.
Damping Force Adjustment
The rebound and compression damping
force can be individually adjusted by turning
the respective adjusters. The rebound
damping force adjuster 1 is located at the
bottom of the rear suspension. The com-
pression damping force adjuster 2 is
located at the left side of the rear suspen-
sion.
To adjust the damping force, set the adjuster
to the standard setting first and then adjust
the adjuster to the desired position.
2-56