REAR BRAKE PEDAL ADJUSTMENT
The rear brake pedal position must be prop-
erly adjusted at all times or the disk brake
pads will rub against the disk causing dam-
age to the pads and to the disk surface.
Adjust the brake pedal position in the follow-
ing manner:
1. Loosen the lock nut 1, and rotate the
push rod 2 to locate the pedal 55 – 65
mm (2.2 – 2.6 in) below the top face of
the footrest.
2. Retighten the lock nut 1 to secure the
push rod 2 in the proper position.
CAUTION
An incorrectly adjusted brake pedal may
force brake pads to rub against the disk
at all times, causing damage to the pads
and disk.
Follow the steps in this section to adjust
the brake pedal properly.
6-50