Konica Minolta FK-502 Service Manual page 81

4. REPLACEMENT PROCEDURE
58
Field Service Ver. 9.0 Jan. 2010
5. Pull out the FK-502 board from the
main body. (2 hinge screws)
NOTE
• When pulling out the FK-502 board,
be sure to hold the 2 hinge screws
provided at the upper and lower
sections and pull them out to this
side.
• When reinstalling the FK-502 board,
be sure to insert it with the board
set to the groove.
• Reinstall the above parts following
the removal steps in reverse.