Konica Minolta FK-502 Service Manual page 36

Field Service Ver. 9.0 Jan. 2010
Max. scanning size
Max. recording size
Treatment of transmis-
sion error
Mail reception
C652/C652DS/C650/
C552/C552DS/C550/
C452/C451/C360/C353/
C280/C253/C220/C203
C450/C351/C252/C250
C352/C300
751/750/601/600/501/
500/421/420/361/360
C652/C652DS/C650/
C552/C552DS/C550/
C452/C451/C450/C360/
C353/C352/C351/C300/
C280/C253/C252/C250/
C220/C203
751/750/601/600/501/
500/421/420/361/360
Mail transmitted again.
Internet fax Rx error
report
Mail acquisition interval
Manual POP reception
Reception by specifying a
box
Received document size
Reception coding system TIFF-S (MH), TIFF-F (MR/MMR)
1. OUTLINE OF THE DEVICE
420 mm x 297 mm (A3 size)
Width: 297 mm
Length: 1000 mm at the maximum
(432 mm at the maximum for 600 dpi resolution)
420 mm x 297 mm (A3 size)
Width: 297 mm
Length: 432 mm at the maximum
420 mm x 297 mm (A3 size)
Width: 297 mm
Length: 600 mm at the maximum
(432 mm at the maximum for 600 dpi resolution)
420 mm x 297 mm (A3 size)
Width: 297 mm
Length: 1000 mm at the maximum
004
In the case of 501/500/421/420/361/360, it results
in 432 mm at the maximum for 600 dpi resolution.
420 mm x 297 mm (A3 size)
The data of an original that is longer than 1000
mm cannot be received.
When receiving the data of an original that is
longer than the paper sizes set in the paper trays,
the data is printed according to the setting of [Print
Separate Fax Pages].
420 mm x 297 mm (A3 size)
The data of an original that is longer than 1000
mm cannot be received. (For 600 dpi resolution,
data of an original that is longer than 460 mm can-
not be received.)
When receiving the data of an original that is
longer than the paper sizes set in the paper trays,
the data is printed according to the setting of [Print
Separate Fax Pages].
None
When documents cannot be sent to the SMTP
server, transmission error report to be printed/not
printed can be set.
When MDN/DSN response is received, to be
printed/not to be printed can be set.
When MDN/DSN response is received, transmis-
sion result is indicated on the transmission control
report.
MDN/DSN response monitoring time can be set in
the range from 0 to 99 hours.
Can be set to 1 to 60 minutes.
Possible
Not Available (except Memory RX)
width: A4 / B4 / A3
13