7. SERVICE MODE
(7) Original Reading Mode Default (B&W MFP only)
• Default setting of User Menu
(8) Fax Board Watchdog
• Watch dog by using CPU of the Fax board
• "ON": Reset when hung up.
• "OFF": Keeps being hung up.
• Normally you do not need to change the setting.
(9) Fax BOOT Rewrite on ISW
• "ON": Required when a BOOT BLOCK program is upgraded or a hardware is changed.
• Normally you do not need to change the setting.
(10) Error Code Display Time
• The time communication error is displayed.
(11) RX or Print STOP
• Not used.
(12) Report Auto Output Stop
• Not used.
(13) Auto Rotation (LT/A4T)
• "ON": Transmits in the A4 width.
• "OFF": Transmits in the A3 width.
(14) Error Page Resending
• "All page": All pages are resent.
• "Error page": From an error page are resent.
(15) Number of Redials (Error Page)
• Counted as a busy redial when the error page redial is busy.
100
Flash memory
Application
program area
ISW program
BOOT BLOCK
System initialization
program
Field Service Ver. 9.0 Jan. 2010