Konica Minolta FK-502 Service Manual page 131

7. SERVICE MODE
(3) DC-LOOP Check
• Checks the DC loop current before dialing.
• When the current is zero, an error occurs. (T.80)
• You can change the setting to be compliant to standards in other countries. In Japan, set
this parameter to OFF.
(4) min. RING OFF Time
• MInimum time to recognize ringer interval.
For country spec.
b: Ring-off time
a: To avoid judging "a" as a ring-off time.
(5) Response Waiting Time
See "Communication".
See P.101
(6) Pause Time
• The pause time for one pause key (pause between digits)
108
a
b
Field Service Ver. 9.0 Jan. 2010
a