Konica Minolta FK-502 Service Manual page 177

9. TROUBLESHOOTING
Item
bit7
(21) BOX no
(4th & 3rd BOX No. 4th digit [BCD]
digit)
(22) BOX no.
(2nd & 1st BOX No. 2nd digit [BCD]
digits)
Supplement: (Not used) bit is set to 0.
9.3 Error Code (Network fax)
• When there occurs any trouble with this machine, the error screen is displayed. And on
this error screen, the following error message is shown. Take a necessary step referring
to the table given below.
9.3.1 Error code of the transmission system
Code Classification
N10 Connection error
N11 Connection error
N12 Connection error
N13 Connection error
N14 Connection error Mail delivery error
N15 Remote reset
N16 Remote busy
N17 LAN access
154
bit6 bit5 bit4
Details of the error Redial
Server connection
No
error
Connection declined
by the other party No
machine
Disconnection of the
Yes
line
No response
received from the No
network
No
Connection reset by
the other party Yes
machine
Remote machine is
Yes
busy
Communication time
Yes
out
Field Service Ver. 9.0 Jan. 2010
Description
bit3 bit2
BOX No. 3rd digit [BCD]
BOX No. 1st digit [BCD]
Corrective Action
Check the condition of the other party
machine.
Check the network setting of local
machine.
Ask the network administrator if the net-
work is operating normally.
Reception is declined.
Check the condition of the other party
machine.
Check to see if there occurs any abnormal
condition with the network, such as the dis-
connection of a cable.
Check the condition of the other party
machine.
Check the network setting of local
machine.
Ask the network administrator if the net-
work is operating normally.
Check the condition of the other party
machine. Send it again after waiting for a
while.
Check the condition of the other party
machine. Send it again after waiting for a
while.
Check the condition of the other party
machine. Send it again after waiting for a
while.
Check the condition of the other party
machine. Send it again after waiting for a
while.
bit1 bit0