Konica Minolta FK-502 Service Manual page 128

Field Service Ver. 9.0 Jan. 2010
3. Press the [Function Parameter] key.
4. Select the address and then, enter the address using [A] to [F] key or keypad.
* A Cursor is movable if
5. Next, select the data and enter a value using binary numbers with keypad.
6. When the address and the value are correct, press the [Apply] key.
7. After the settings have been completed, press the [END] key.
Note: See "ADDRESS PARAMETER LIST" for the list of address parameters.
See P.157
or is pushed.
7. SERVICE MODE
15LAF3E022DA
15LAF3E026DA
105