Recording Section - Konica Minolta FK-502 Service Manual

Field Service Ver. 9.0 Jan. 2010
Automatic background
control (ABC)
Finished stamp
Scanning time
Automatic feeder
capacity
1.1.3

Recording section

Recording
Recording paper size
Recording paper
cassette
Staple
Recording speed
Recording size
Maximum reception
length
Reduction record
Page separation record Yes
Offset output at each
communication
Rotation reception
Two-sided reception
2-in-1 reception
Smoothing
Print/Fax output
settings
Bypass print
Total page counter
Monitor print
Yes
Varies depending on models.
Refer to "10.3 Differences of Functions by Model (as of Jan, 2010)".
See P.199
Compliant to the copier standards
Compliant to the copier standards
Compliant to the copier standards
All sizes except for B6 and Postcard (See the copier basic specifications.)
Auto recording paper selection
Note: A5 and B5 paper is used only for A5 and B5 reception respectively
Tray 1 to Tray 4, bypass Tray
No
Compliant to the copier standards
A3 size maximum
• A3 fix as reception record ability declaration in protocol.
Varies depending on models.
Refer to "10.3 Differences of Functions by Model (as of Jan, 2010)".
See P.199
• In case of being larger than the maximum reception length, a communica-
tion error occurs.
• When the memory over occurs during reception, the received data is
printed.
When the received image information is larger than the recording paper, it is
automatically reduced to the recording paper size and recorded.
Yes (Job unit reception only)
Yes
• Images are rotated by 90 degrees and recorded on the recording paper in
LEF direction.
Yes (Utility Mode)
No
Yes (at converting the resolution)
Yes
Possible to use as an active tray in auto selection mode.
Compliant to the copier standards
No (copy at sending)
1. OUTLINE OF THE DEVICE
3