IBM eServer pSeries 610 6C1 Installation Manual page 75

8. Rotate the adapter retention latch (1) counterclockwise.
9. Raise the tab (2) on the adapter guide over the tab on the top corner of the
adapter.
10. Carefully grasp the adapter (4) by its top edge or upper corners, and remove it
from the system board.
11. If you are not installing another adapter in this slot, install an expansion-slot cover
and close the adapter retainer flap (3) if previously opened.
12. If you have other options to install, refer to "Option List" on page 36.
If you do not have other options to install, replace the covers as described in
"Replacing the Service Access Covers" on page 77.
Chapter 3. Installing Options in Your System
59