IBM eServer pSeries 610 6C1 Installation Manual page 69

8. Remove the memory DIMM by pushing the tabs (1) out on the memory connectors
and then pulling the memory DIMM (2) out of the connector..
1
9. Replace the memory card into the system unit. See "Installing a Memory Card" on
page 46 for more information.
10. If you have other options to install, refer to "Option List" on page 36.
If you do not have other options to install, replace the processor and memory card
cover as described in "Removing and Replacing Processor and Memory Card
Cover" on page 41.
11. Replace the system unit covers as described in "Replacing the Service Access
Covers" on page 77.
2
Push Locking Tabs
Out to Release Memory
Module
Chapter 3. Installing Options in Your System
1
53