Bezel (Model 6C1) - IBM eServer pSeries 610 6C1 Installation Manual

Bezel (Model 6C1)

1. If you have not already done so. place the server in the service position as
described in "Placing the Model 6C1 in the Service Position" on page 35.
2. If you have not already done so, remove the service access cover as described in
"Removing the Service Access Covers" on page 37.
3. Press the bezel-release lever (1) and remove the bezel (2).
40
Installation Guide
3
1 Bezel-release lever
2 Bezel
3 Side with bezel tabs and slots
1
2