Table of Contents
Advertisement
VoiceFinder AP1200 VoIP Gateway Installation Guide Version 1.0
Chapter 2. Before Installation
Installation Requirements
Warning
The following recommendation should be followed for safe operation of the product.
STOP
Ensure VoiceFinder AP1200 Gateway is in a dust-free environment before and
after installation.
Make sure to install VoiceFinder AP1200 Gateway on a flat and safe surface.
To prevent accidents, be careful with ties, scarf, sleeves, and any other loose
clothing from entangling with the chassis.
Avoid any actions that may effect the equipment or the operator.
Electrical Requirements
Danger
There are two main sources of electrical problems with VoiceFinder AP1200 Gateway:
the power supply and static electricity.
This section describes safety recommendations for each case.
AddPac Technology Co., Ltd.
Electrical Safety
Operate at a position where immediate shut-off of power supply is possible.
Turn off the power while installing the equipment.
Avoid operating the equipment alone at potentially dangerous environment.
Do not assume the power is switched off, but always confirm the power
status.
Be extremely cautious when operating in a humid environment or with an
ungrounded power extension cable.
Prevention of Static Electricity
23
-
-
Advertisement
Table of Contents
