Conformity To National Regulations - Leica iCON robot 60 User Manual

Beam diameter
8.7
8.7.1
Conformity to
national regulations
Frequency band
Output power
Antenna
iCON robot 60/iCON builder 60, Technical Data
The laser beam diameter is influenced by the intensity of the laser guide, by the appli-
cation distance, by the characteristics of the surface and by the ambient light.
Typical laser beam diameter on white, smooth surfaces with intensity 50% and
100%
[mm]
70
60
50
40
30
20
10
a
0
0 100
GUS_007

Conformity to National Regulations

iCON robot 60/iCON builder 60
• FCC Part 15 (applicable in US)
• Hereby, Leica Geosystems AG, declares that the product iCON robot 60/iCON
builder 60 is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC and other applicable European Directives. The
declaration of conformity may be consulted at http://www.leica-geosys-
tems.com/ce.
Class 1 equipment according European Directive 1999/5/EC (R&TTE)
can be placed on the market and be put into service without restric-
tions in any EU Member state.
• The conformity for countries with other national regulations not covered by the FCC
part 15 or European directive 1999/5/EC has to be approved prior to use and oper-
ation.
• Japanese Radio Law and Japanese Telecommunications Business Law Compliance.
– This device is granted pursuant to the Japanese Radio Law and the Japanese
Telecommunications Business Law.
– This device should not be modified (otherwise the granted designation number
will become invalid).
2402 - 2480 MHz
Bluetooth:
Type:
Gain:
e
d
c
b
200 300
5 mW
Internal Microstrip antenna
1.5 dBi
a) Theoretical 1/e
b) Daylight, intensity 50%
c) Daylight, intensity 100%
d) Darkness, intensity 50%
e) Darkness, intensity
100%
[m]
2
57