Atack - Leica iCON robot 60 User Manual

6.3
Description
Adjusting tracks
step-by-step
iCON robot 60/iCON builder 60, TPS Specific Functionality within iCON site/iCON build

Atack

Atack is an application to adjust the four tracks of a concrete paver dynamically relative
to the body of the machine. A wizard guides through the process requiring some user
interaction.
Step Description
1.
Select
2. Select an option.
PRI/SEC
Parallel
Perpendicular
3. Follow the instructions on the screen.
Then tap the next Wizard step
4. Tap on all tracks you want to measure.
To select all tracks at once, tap on the grey square in the middle.
The colours of the track symbols indicate:
• Blue = Track selected
• Grey = Track not selected
Then tap the next Wizard step
from the Machine Control Tools Toolbox to start the wizard.
Aim to PRImary prism and measure.
Then aim to SECondary prism and
measure.
Aim to first point at the side of the
machine and measure.
Then aim to second point at the side
of the machine and measure.
Aim to first point at the rear of the
machine and measure.
Then aim to second point at the rear
of the machine and measure.
to proceed.
to proceed.
48