Leica iCON robot 60 User Manual page 22

iCON robot 60/iCON builder 60, Description of the System
Term Description
EGL Electronic Guide Light
An EGL fitted to an instrument assists with prism targeting. It
consists of two differently coloured flashing lights located in the
instrument telescope housing. The person holding the prism can
align themselves into the line of sight of the instrument.
Motorised Instruments fitted with internal motors, enabling automatic hori-
zontal and vertical turning are referred to as Motorised.
ATR Automated Target Aiming.
ATR refers to the instrument sensor which enables the automatic
target aiming to a prism.
Automated Refers to the instrument sensor which enables the automatic
target aiming to a prism.
Three automation modes are available:
• Single Manual: No automation and no lock.
• Single Auto: Automatic target aiming to a prism.
• Continuous with lock: Automatic tracking of an already targeted
prism.
PowerSearch PowerSearch refers to the instrument sensor which enables the
automatic rapid finding of a prism.
Communication- A component of RCS is the RH1200/RH15/CCD2 Communication-
Handle Handle. It is an instrument carry handle with an integrated radio
modem with attached antenna.
Communication Communication side cover with integrated Bluetooth, SD card slot
side cover and USB port is standard for a iCON robot 60/iCON builder 60
instrument. In combination with the RH1200/RH15/CCD2 Commu-
nicationHandle, it is also a component of RCS.
Machine Control Enables optimal communication between iCON robot 60 and 3D
Application Machine Control Systems. To carry out machine calibration and
alignment routines when used with Leica 3D Paving Systems.
Setup Pilot A method to carry out the setup of the iCON robot 60 to a number
of existing control points in a fully automated way.
Cube Search A method to optimise the prism search. Creates a cube-shaped
search window around the position where the prism was lost.
Dynamically , the search window is updated and adjusted in size
depending on the distance between prism and iCON robot 60.
Target Snap A prism search method. Snaps to the desired prism by ignoring
other prisms, which are known from the database.
22