Automatic Target Aiming Atr; Powersearch Ps - Leica iCON robot 60 User Manual

Table of Contents

Advertisement

1.6.4
General
Labelling
1.6.5
General
iCON robot 60/iCON builder 60, Safety Directions

Automatic Target Aiming ATR

The Automatic Target Aiming built into the product produces an invisible laser beam
which emerges from the telescope objective.
The product described in this section is classified as laser class 1 in accordance with:
• IEC 60825-1 (2007-03): "Safety of laser products"
• EN 60825-1 (2007-10): "Safety of laser products"
These products are safe under reasonably foreseeable conditions of operation and are
not harmful to the eyes provided that the products are used and maintained in accord-
ance with this User Manual.
Description
Maximum peak power
Pulse duration
Pulse repetition frequency (PRF)
Wavelength
Class 1 Laser Product
according to IEC 60825-1
(2007 - 03)

PowerSearch PS

The PowerSearch built into the product produces an invisible laser beam which
emerges from the front side of the telescope.
The product described in this section is classified as laser class 1 in accordance with:
• IEC 60825-1 (2007-03): "Safety of laser products"
• EN 60825-1 (2007-10): "Safety of laser products"
These products are safe under reasonably foreseeable conditions of operation and are
not harmful to the eyes provided that the products are used and maintained in accord-
ance with this User Manual.
Description
Wavelength
Maximum average radiant power
Pulse duration
a
006272_001
a) Laser beam
Value
10 mW
11 ms
37 Hz
785 nm
Type: iCR6X
Equip.No.: 1234567
Power: 12V / 7,4V
,1A max.
Leica Geosystems AG
CH-9435 Heerbrugg
Manufactured: 20XX
Made in Origin
Complies with FDA performance standards for laser products
expect for deviations pursant to Laser Notice No. 50, dated
June 24, 2007
This device complies with part 15 of the FCC Rules. Operation
Is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Value
850 nm
11 mW
20 ns, 40 ns
Art.No.:
7900XX
S.No.:
123456
14

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Icon builder 60

Table of Contents