Electronic Guide Light Egl; Laser Plummet - Leica iCON robot 60 User Manual

Labelling
1.6.6
General
1.6.7
General
iCON robot 60/iCON builder 60, Safety Directions
Description
Pulse repetition frequency (PRF)
Beam divergance
Class 1 Laser Product
according to IEC 60825-1
(2007 - 03)

Electronic Guide Light EGL

The Electronic Guide Light built into the product produces a visible LED beam which
emerges from the front side of the telescope.

The product described in this section, is excluded from the scope of IEC 60825-
1 (2007-03): "Safety of laser products".
The product described in this section, is classified as exempt group in accord-
ance with IEC 62471 (2006-07) and does not pose any hazard provided that
the product is used and maintained in accordance with this user manual.
a
b
TS_099

Laser Plummet

The laser plummet built into the product produces a visible red laser beam which
emerges from the bottom of the product.
The laser product described in this section is classified as laser class 2 in accordance
with:
• IEC 60825-1 (2007-03): "Safety of laser products"
• EN 60825-1 (2007-10): "Safety of laser products"
These products are safe for momentary exposures but can be hazardous for deliberate
staring into the beam. The beam may cause dazzle, flash-blindness and after-images,
particularly under low ambient light conditions.
a
006275_001
a) Laser beam
a) LED beam red
b) LED beam yellow
Value
24.4 kHz
0.4 mrad x 700 mrad
Type: iCR6X
Equip.No.: 1234567
Power: 12V / 7,4V ,1A max.
Leica Geosystems AG
CH-9435 Heerbrugg
Manufactured: 20XX
Made in Origin
Complies with FDA performance standards for laser products
expect for deviations pursant to Laser Notice No. 50, dated
June 24, 2007
This device complies with part 15 of the FCC Rules. Operation
Is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Art.No.:
7900XX
S.No.:
123456
15