Distancer, Measurements Without Reflectors - Leica iCON robot 60 User Manual

Labelling
1.6.3
General
iCON robot 60/iCON builder 60, Safety Directions
Description
Maximum average radiant power
Pulse duration
Pulse repetition frequency (PRF)
Wavelength
Beam divergance
Class 1 Laser Product
according to IEC 60825-1
(2007 - 03)

Distancer, Measurements without Reflectors

The EDM module built into the product produces a visible laser beam which emerges
from the telescope objective.
The laser product described in this section is classified as laser class 3R in accordance
with:
• IEC 60825-1 (2007-03): "Safety of laser products"
• EN 60825-1 (2007-10): "Safety of laser products"
Direct intrabeam viewing may be hazardous (low eye hazard level), in particular for
deliberate ocular exposure. The beam may cause dazzle, flash-blindness and after-
images, particularly under low ambient light conditions. The risk of injury for laser
class 3R products is limited because of:
a) unintentional exposure would rarely reflect worst case conditions of (e.g.) beam
alignment with the pupil, worst case accommodation,
b) inherent safety margin in the maximum permissible exposure to laser radiation
(MPE)
c) natural aversion behaviour for exposure to bright light for the case of visible
radiation.
Description
Maximum average radiant power
Pulse duration
Pulse repetition frequency (PRF)
Wavelength
Beam divergence
NOHD (Nominal Ocular Hazard Distance) @ 0.25s
a
006272_001
a) Laser beam
Value
0.33 mW
800 ps
100 MHz - 150 MHz
650 nm - 690 nm
1.5 mrad x 3 mrad
Type: iCR6X
Equip.No.: 1234567
Power: 12V / 7,4V ,1A max.
Leica Geosystems AG
CH-9435 Heerbrugg
Manufactured: 20XX
Made in Origin
Complies with FDA performance standards for laser products
expect for deviations pursant to Laser Notice No. 50, dated
June 24, 2007
This device complies with part 15 of the FCC Rules. Operation
Is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Value (R400/R1000)
5.00 mW
800 ps
100 MHz - 150 MHz
650 nm - 690 nm
0.2 mrad x 0.3 mrad
80 m / 262 ft
Art.No.:
7900XX
S.No.:
123456
12