Leica iCON robot 60 User Manual page 2

Introduction
Purchase
Product identifica-
tion
Trademarks
Validity of this
manual
Available
documentation
iCON robot 60/iCON builder 60, Introduction
Congratulations on the purchase of a Leica iCON robot 60/iCON builder 60.
This manual contains important safety directions as well as instructions for setting up
the product and operating it. Refer to "1 Safety Directions" for further information.
Read carefully through the User Manual before you switch on the product.
The type and serial number of your product are indicated on the type plate.
Always refer to this information when you need to contact your agency or Leica
Geosystems authorised service workshop.
• Windows is a registered trademark of Microsoft Corporation in the United States
and other countries
®
Bluetooth
• is a registered trademark of Bluetooth SIG, Inc.
• SD Logo is a trademark of SD-3C, LLC.
All other trademarks are the property of their respective owners.
This manual applies to the iCON robot 60/iCON builder 60 instruments. Differences
between the various models are marked and described.
Name Description/Format
iCON robot Provides an overview of the product together with tech-
60/iCON nical data and safety directions. Intended as a quick
builder 60 reference guide.
Quick Guide
iCON robot All instructions required in order to operate the product
60/iCON to a basic level are contained in the User Manual.
builder 60 User Provides an overview of the product together with tech-
Manual nical data and safety directions.
Name Description/Format
iCON build How Overall comprehensive guide to the product and applica-
to Guide, iCON tion functions. Included are detailed descriptions of
site How to special software/hardware settings and software/hard-
Guide ware functions intended for technical specialists.
Refer to the following resources for all iCON robot 60/iCON builder 60 docu-
mentation/software:
• the Leica USB documentation card
• https://myworld.leica-geosystems.com
 

-
 
2