Leica iCON robot 60 User Manual page 42

iCON robot 60/iCON builder 60, Check & Adjust
Step Description

The fine pointing has to be performed manually in both faces.
4.
Tap in the wizard to get to the next page.
Aim the telescope accurately at a target at about 100 m distant or less if not
possible. The target must be positioned at least 27°/30 gon above or
beneath the horizontal plane.
Press the measurement keys to measure and to continue to the next step.
Motorised instruments change automatically to the other face.

The fine pointing has to be performed manually in both faces.
5. Adjustment Accuracy
After pressing the last
to the instrument.
6.
Tap to get back to the Devices page.
in the wizard the results are shown and stored
42