Modulator Menu Options And Parameters - Radyne DMD50 Installation And Operation Manual

Universal satellite modem
Hide thumbs Also See for DMD50:
Table of Contents

Advertisement

DMD50 Universal Satellite Modem

4.3.2 Modulator Menu Options and Parameters

NETWORK SPEC
TM118 – Rev. 1.1
{IDR, IBS, DROP & INSERT, CLOSED NET, DVB SAT}
The Network Spec Command sets a number of
parameters within the modem to meet a specification.
The purpose is to eliminate keystrokes and potential
compatibility problems.
Data rates not covered by a given network specification
will not be allowed. If the mode of operation is selected
after the data rate has been entered, then the data rate
must be compatible with the desired mode of operation
or the network spec will not be allowed. The following
parameters cannot be changed while the unit is in the
given mode of operation:
IDR:
(IESS-308)
For Data rates 1.544, 2.048, 6.312, 8.448 Mbps
Framing Type:
Scrambler Type:
Spectrum Mask:
For Data Rates < 1.544
Framing Type:
Scrambler Type:
Spectrum Mask:
IBS:
(IESS-309)
For Data Rates < 2048
Framing Type:
Scrambler Type:
Spectrum Mask:
Drop & Insert:
Data Rates:
Framing Type:
Scrambler Type:
Spectrum Mask:
Efficient D&I
Closed Network,
Data Rates:
n x 64, N = 1-31 Any combination
Descrambler Type:
Spectrum Mask:
User Interfaces
96 Kbps (IDR)
V.35
Intelsat
1/15 (IBS)
IESS-309
Intelsat
1/15 (IBS)
IESS-309
Intelsat
n x 64 n = 1, 2, 3, 4, 5, 6, 8,
10,12, 15, 16, 20, 24, 30
1/15 (IBS)
IESS-309
Intelsat
IESS-309
Intelsat
4-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tm118

Table of Contents