Introduction; Image Rotation; Scaling; De-Interlacing - Martin P3-100 System Controller Installation And Safety Manual User Manual

Hide thumbs Also See for P3-100 System Controller:

Table of Contents

Introduction

This manual explains how to connect and use the Martin Professional™ P3-100™ System Controller to

display video on a video panel installation that consists of Martin Professional™ EC-20™, LC Plus™ Series

or upgraded LC™ Series panels of one type only or used in combination. The manual corresponds to version

2.0 of the P3-100, LC Plus panels, LC panels upgraded to LC Plus spec and EC-20 panels software. In other

words, version 2.0 or later software needs to be installed both on the P3-100 and on panels.

For information about installing EC-20 or LC Plus panels, see the user documentation supplied with panels

and available for download from the Martin website at www.martin.com

The latest firmware updates and user documentation for all Martin Professional products are always available

from the Martin website.

Warning! Read "Safety Information" on page 3 before installing, powering or operating the

P3-100.

Thank you for selecting the Martin P3-100, a video processor for the EC™ and LC Plus™ Series of modular

LED-based IP65-rated video display panels from Martin Professional. This product features:

• Intuitive GUI (graphic user interface)

• DVI-I digital and composite, S-Video or component analog video input

• 500 000 pixel output resolution (expandable by stacking two or more P3-100s together)

• Genlock

• Gamma curve adjustment

• Real-time control via DMX

• Dynamic panel remapping

• P3-100 Offline Editor (PC application that lets you prepare an installation layout offline)

Comments or suggestions regarding this user manual may be e-mailed to service@martin.dk or posted to:

Technical Documentation, Martin Professional A/S, Olof Palmes Allé 18, DK-8200 Aarhus N, Denmark.

P3-100 user manual

Table of Contents